Metal roofing · Miami-Dade & Broward
Metal Roofing in Miami: Standing Seam & 5V Crimp
We install and repair standing seam and 5V crimp metal roofs in aluminum and Galvalume, built to Miami-Dade's High-Velocity Hurricane Zone code. Our own crews, our own permits, and a written price before anything starts.
✓ Licensed CCC1333474
✓ Miami-Dade approved systems
✓ 10-year labor warranty
What a metal roof costs in Miami
On a typical 2,000 to 2,500 sq ft Miami home, a metal roof replacement runs $30,000 to $40,000. That's more than shingle or tile, and the gap is the price of a roof that can last decades longer.
Metal
$30K–$40K
Shingle
$18K-$25K
Tile
$25K-$35K
Timeline
~45 days
About 45 days from contract signing to final inspection. Ygrene financing is available.
What moves the price
Standing seam or 5V crimp:
Standing seam costs more because of the concealed clips and custom-formed panels
Aluminum or Galvalume:
Aluminum costs more and is the safer choice near salt water
Roof shape:
Hips, valleys, skylights and dormers add labor and trim
Decking:
Rotted plywood found at tear-off is replaced to code, and we show you photos before we do it
Standing seam or 5V crimp?
Both are approved for the High-Velocity Hurricane Zone. The difference is where the screws are.
Standing seam
Fasteners
Hidden clips under raised seams, no screws through the panel face
Lifespan
Standing seam: About 40 to 70 years
Upkeep
Standing seam: Very little
Look
Standing seam: Clean, modern lines
Price
Standing seam: Higher
Solar
Standing seam: Panels clamp to the seams with no holes in the roof
5V crimp
Fasteners
Screws through the face of the panel, sealed with rubber washers
Lifespan
About 20 to 30 years, with screws and washers replaced every 5 to 10 years
Upkeep
Periodic screw checks, since sun breaks down the washers
Look
The traditional South Florida and Keys look
Price
Lower
Solar
Panels mount with sealed brackets through the roof
Aluminum or Galvalume near the coast?
Galvalume is steel coated with aluminum and zinc. It's strong, costs less, and works well inland. Aluminum doesn't rust, so it's the better pick for homes near Biscayne Bay, the ocean or saltwater canals. Many Galvalume warranties limit coverage close to salt water, so we check the warranty terms for your address before we recommend one. Both come with Kynar 500 (PVDF) paint finishes that resist fading and chalking.
Why Choose Greener Roofing & Solar for Your Metal Upgrade?
Greener Roofing & Solar is licensed (CCC1333474) and insured. Our own crews install every metal roof to Miami-Dade's High-Velocity Hurricane Zone code, with flashing, valley underlayment and fastening done to the approved specs. You get a written estimate before any work starts, and we pull the permit and book the inspections.
Frequently Asked Questions
Standing seam or 5V crimp?
Both are approved for the High-Velocity Hurricane Zone. The difference is where the screws are.
Standing seam
Fasteners
Hidden clips under raised seams, no screws through the panel face
Lifespan
Standing seam: About 40 to 70 years
Upkeep
Standing seam: Very little
Look
Standing seam: Clean, modern lines
Price
Standing seam: Higher
Solar
Standing seam: Panels clamp to the seams with no holes in the roof
5V crimp
Fasteners
Screws through the face of the panel, sealed with rubber washers
Lifespan
About 20 to 30 years, with screws and washers replaced every 5 to 10 years
Upkeep
Periodic screw checks, since sun breaks down the washers
Look
The traditional South Florida and Keys look
Price
Lower
Solar
Panels mount with sealed brackets through the roof
Get a Free
Metal Roof Estimate
in Miami
Find out what a standing seam metal roof would cost for your home. We’ll measure the roof, check the deck and send a written estimate, usually $30,000 to $40,000 for a typical 2,000 to 2,500 sq ft Miami home. Ygrene financing is available.
Prefer to call? (305) 688-5588